System Setup
Xerox 6204 Wide Format Solution
User Guide
6-177
3. Select [1. Low Power].
The [Auto Power Saver] screen will display.
4. Using the numeric keypad or the scroll buttons, enter the desired [Low Power mode] setting, and
then press [Save].
Note
This setting is the amount of time that must elapse since the last user operation, e.g., a button
press or document scan, until the machine enters the [Low Power mode].
5. Select [Close] on the [Timers] menu to return to the [Setup] menu.
To Next Page
Loading...
Need help?
General