Copy
Xerox 6204 Wide Format Solution
User Guide
3-75
6. When the copy job is finished, press the <Interrupt> button again.
The interrupt mode will be cancelled, the <Interrupt> button will go out, and the suspended print
job will resume printing.
Notes
• If you forget to press the <Interrupt> button to cancel the interrupt mode, it will be
canceled automatically after the default [Print Interrupt] timer times out.
• The print interrupt timeout period may be changed from the 60 second default to as
long as 99 minutes. This is accomplished by selecting the [Setup] button on the control
panel, then selecting the [Timers] feature, and finally, [4. Print interrupt]. Use either the
numeric keypad or the scroll buttons to select a different timeout period.