Xerox 700 Digital Color Press - Page 174

8-40 User Guide
Problem Solvin
g
Xerox 700 Di
g
ital Color Press
Cause: An error occurred with the media reader.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
Cause: A connecting cable is not connected with a media reader correctly.
Remedy: Connect the connecting cable and power-cycle the machine. If the machine is not
improved by performing the relevant remedy, contact your Xerox Customer Support
Center.
Cause: A media is not inserted correctly.
Remedy: Insert the media correctly.
Refer to 016-795.
Cause: 2 sided print could not be made due to insufficient memory.
Remedy: Print each side.
Cause: Charge Corotron cleaner failure.
Remedy: Power-cycle the machine. If the error is not fixed by performing the relevant
remedy, contact the Customer Support Center.
Cause: Charge Corotron fault.
Remedy: Power off/on the machine.
Cause: Punch Scrape Container is full or near full.
Remedy: Remove and empty the scrape container and reinstall.
Cause/RemedyCode
Downloaded From ManualsPrinter.com Manuals