8-41User Guide
Problem SolvingXerox 700 Digital Color Press
Cause: Job was divided and printed due to insufficient disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
Cause: There is a problem with the document attached to the received mail.
Remedy: Check the attached document.
Cause: The settings for stapling are canceled and prints the data.
Remedy: Confirm the staple position and try to print again.
Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
Cause: The settings for punching are canceled.
Remedy: Confirm the punching position and try to print again.
Cause: The settings for folding are canceled.
Remedy: Confirm the folding settings and try to print again.
Cause: The number of pages exceeds the number of pages that can be stapled.
Remedy: Decrease the number of pages, or cancel the stapling settings, then try to print
again.
Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
Cause/RemedyCode
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
