Xerox 700 Digital Color Press - Page 176

8-42 User Guide
Problem Solvin
g
Xerox 700 Di
g
ital Color Press
Cause: Detected a communication error between the printer and the controller.
Remedy: Remove and reinsert the cable connection between the printer and the controller.
Power off and on both the printer and the controller. If the problem persists, call the
Customer Support Center.
Cause: Detected an internal print check error by the controller.
Remedy: Remove and reinsert the command/video cable between the controller and the
printer. Power off and on both the printer and the controller. If the problem persists, call
the Customer Support Center.
Cause: Detected a mismatch with the software version of the controller.
Remedy: Contact the Customer Support Center for information and/or instructions to
remedy the problem.
Cause: Detected a communication error of the video system by the controller.
Remedy: Remove and reinsert the cable connection between the printer and the controller.
Power off and on both the printer and the controller. If the problem persists, call the
Customer Support Center.
Cause: Detected a communication error by the controller.
Remedy: Remove and reinsert the cable connection between the printer and the controller.
Power off and on both the printer and the controller. If the problem persists, call the
Customer Support Center.
Cause: Detected a fatal error by the controller.
Remedy: Power on/off both the controller and the printer. If the problem persists, contact
the Customer Support Center.
Cause/RemedyCode
Downloaded From ManualsPrinter.com Manuals