Xerox ApeosPort-II 5010 User Manual

14 Maintenance
412
Maintenance
14
1 Make sure that the machine has
stopped, and open the front cover
of the finisher.
2 Grip the lever as shown in the
figure to pull out the staple
cartridge to the right, towards you.
3 Move up the staple cartridge to
take it out of the machine.
4 Press in both sides of the staple
cartridge holder marked "PUSH".
The staple cartridge rises up and
becomes removable.
Important • If there are still staples inside
the staple case, the case will
not rise up.

Xerox ApeosPort-II 5010 Specifications

General

Brand	Xerox
Model	ApeosPort-II 5010
Category	All in One Printer
Language	English