Replacing Consumables
413
Maintenance
14
5
Insert your fingertip into the round
section on the holder and remove
the staple cartridge.
6
Push a new staple cartridge into
the holder.
7
Push the top of the staple cartridge
holder down as shown.
8
Remove the tab from the new
staple cartridge as shown.
9
Insert the staple cartridge into the
machine until you hear it click into
place
.
10
Close the front cover of the finisher.
Note • If you do not completely close the front cover, the machine will display a message and not
resume operation.
To Next Page
Loading...
