Xerox ApeosPort-II 5010 - Page 546

16 Appendix
544
Appendix
16
B-Finisher Specifications
C-Finisher Specifications
Number of originals held 75 sheets
Important • When using Xerox P paper
Original changing speed 52 sheets/minute (A4 1-sided)
26.4 sheets/minute (A4 2-sided)
Tray type Finisher tray × 1: Collated (offset stacking available)/ Uncollated
(offset stacking available)
Paper size/Supported
paper
Maximum: A3, 11 × 17", Minimum: B5
64 - 105g/m
2
Tray capacity A4: 1,000 sheets, B4 or larger: 500 sheets, Mixed stack*: 300
sheets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets:50 sheets (64 g/m
2
or less)
Paper size : Maximum A3, 11x17" / Minimum B5
Stapling position: 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using Xerox P paper
Dimensions/Weight Width 567 x Depth 584 x Height 940 mm, 30 kg
Space requirements
(when connected to the
main unit)
<DocuCentre-II 5010/4000>
Width 1,538 x Depth 668 mm (main unit + B-Finisher)
<ApeosPort-II 5010/4000/3000>
Width 1,538 x Depth 678 mm (main unit + B-Finisher)
Tray type Output tray × 1 : Collated/Uncollated
Finisher tray × 1: Collated (offset stacking available)/
Uncollated (offset stacking available)
Paper size/Supported
paper
Output tray Maximum: A3, 11x17", Minimum: B5 , 56-216g/m
2
Finisher tray Maximum: A3, 11x17", Minimum: B5 , 56-216g/m
2
Important • Transparencies and labels are not supported.
Tray capacity Output tray 500 sheets
Finisher tray (For paper not stapled)
Width: 216 mm or smaller: 3,000 sheets
Width: larger than 216 mm: 1,500 sheets
Mixed stack*: 300 sheets
Finisher tray (For paper stapled)
Width: 216 mm or smaller: 200 sets or 3,000 sheets
Width: larger than 216 mm: 100 sets or 1,500
sheets
Mixed stack*: 70 sets or 200 sheets
* Based on when larger size paper is stacked on paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets:50 sheets (90 g/m
2
or less)
Paper size : Maximum: A3, 11 × 17", Minimum:
B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using Xerox P paper