EasyManua.ls Logo

Xerox ApeosPort-II 5010

Xerox ApeosPort-II 5010
619 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
545
Appendix
16
C-Finisher with Booklet Maker Specifications
Punching Supported paper size : A3, 11 × 17", A4, A4 , 8.5 × 11", 8.5
× 11" , B4, B5
Number of punching holes: 2, 3 (optional), or 4
Paper type) : 56 to 169g/m
2
Important When using Xerox P paper
Dimensions/Weight Width 675.0 × Depth 643.0 × Height 1010.0 mm, 50 kg
Width 775.0 × Depth 643.0 × Height 1058.0 mm, 50 kg (When the
extension tray is extended)
Space requirements
(when connected to the
main unit)
<DocuCentre-II 4000/3000>
Width 1,747.0 × Depth 672.0 mm (main unit + C-Finisher, when
the extension tray is extended)
<ApeorPort-II 5010/4000/3000>
Width 1,747.0 x Depth 678.0 mm (main unit + C-Finisher, when
the extension tray is extended)
Tray type Output tray × 1 : Collated/Uncollated
Finisher tray × 1: Collated (offset stacking available)/
Uncollated (offset stacking available)
Booklet tray × 1
Paper size/Supported
paper
Output tray Maximum: A3, 11x17", Minimum: B5 , 56-216 g/m
2
Finisher tray Maximum: A3, 11x17", Minimum: B5 , 56-216 g/m
2
Booklet tray Maximum: A3, 11x17", Minimum: A4 64-90 g/m
2
Important Transparencies and labels are not supported.
Tray capacity Output tray 500 sheets
Finisher tray (For paper not stapled)
Width: 216 mm or smaller: 1,500 sheets
Width: larger than 216 mm: 1,500 sheets
Mixed stack*: 300 sheets
Finisher tray (For paper stapled)
Width: 216 mm or smaller: 200 sets or 1,500 sheets
Width: larger than 216 mm: 100 sets or 1,500
sheets
Mixed stack*: 70 sets or 200 sheets
Booklet tray 15 sheets x 15 sets
* Based on when larger size paper is stacked on paper.
Important When using Xerox P paper
Staple Maximum stapled sheets: 50 sheets (90 g/m
2
or less)
Paper size : Maximum: A3, 11×17", Minimum: B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important When using Xerox P paper
Punching Supported paper size : A3, 11×17", A4, A4 , 8.5x11",
8.5x11" , B4, B5
Number of punching holes: 2, 3 (optional), or 4
Paper type) : 56 to 169 g/m
2
Important When using Xerox P paper
Center binding/folding Maximum number of sheets: 15 sheets (90 g/m
2
or less),
5 sheets (center folding)
Paper size : Maximum: A3, 11×17",
Minimum: A4
Paper type : 60-105 g/m
2
Important When using Xerox P paper

Table of Contents

Related product manuals