Xerox B315 - Page 159

AAddvvaanncceedd IImmaaggiinngg
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
CCoolloorr BBaallaannccee
Cyan - Red
-4 to 4 (0*)
Magenta - Green
-4 to 4 (0*)
Yellow - Blue
-4 to 4 (0*)
Adjust the amount of toner used for each color.
CCoonnttrraasstt
Best for Content*
0–5
Set the contrast of the output.
BBaacckkggrroouunndd RReemmoovvaall
Level
-4 to 4 (0*)
Adjust the amount of background visible on a scanned
image.
SSccaann EEddggee ttoo EEddggee
On
Off*
Allow edge-to-edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
AAddmmiinn CCoonnttrroollss
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
AAuuttoommaattiicc RReeddiiaall
0–9 (5*)
Adjust the number of redial attempts based on the
activity levels of recipient fax machines.
RReeddiiaall FFrreeqquueennccyy
1–200 minutes (3*)
Increase the time between redial attempts to increase
the chance of sending fax successfully.
EEnnaabbllee EECCMM
On*
Off
Activate Error Correction Mode (ECM) for fax jobs.
ECM detects and corrects errors in the fax transmission
process that are caused by telephone line noise and
poor signal strength.
EEnnaabbllee FFaaxx SSccaannss
On*
Fax documents that are scanned at the printer.
Xerox
®
B305/B315 Multifunction Printer User Guide 159
Use printer menus