Managing Virtual Printers 95
6. In the Comments box, type any comment regarding the virtual printer
parameters (optional).
7. The Publish the printer on the network check box is selected by default. Clear
the check box if you do not want to publish the printer on the network.
8. Select the Override PPD parameters check box if you would like the virtual
printer settings to override the PPD parameter selection.
9. Edit the job parameters of your new virtual printer.
10. Click OK in the Add New Virtual Printer dialog box.
The new printer appears in the Printer list.
Editing an Existing Printer
To edit an existing printer:
1. In the Virtual Printers area, select a printer from the list and click the Edit button
.
2. Click Edit.
The Job Parameters window appears.
3. Select the desired parameters and change their settings according to your
requirements.
4. Click OK to return to the Edit Virtual Printer dialog box.
5. Click Save to save the new settings.
Note: If you don't edit the job parameters, the settings of the new virtual
printer are taken from the printer on which it was based.
To Next Page
Loading...
Need help?
General
