10 Chapter 2 – Getting Started
Overview
This chapter describes the main production workflows and procedures for the Spire
CX260.
Turning the Spire CX260 On and Off
Basic and Basic Pro Configurations
To turn on the Spire CX260:
¾
Do one of the following actions:
Turn on the Xerox DocuColor 242/252/260 printer/copier.
The Spire CX260 turns on automatically when the Xerox DocuColor 242/
252/260 printer/copier is turned on.
Push the green On/Off button on the front of the Spire CX260.
To turn off the Spire CX260:
1. Close the Spire CX260 software. From the Job menu, select Exit.
The Spire CX260 software closes, and you return to the Windows desktop.
2. Verify that the Spire icon has disappeared from the taskbar.
3. Do one of the following actions:
Turn off the Xerox DocuColor 242/252/260 printer/copier.
The Spire CX260 automatically turns off when the Xerox DocuColor 242/
252/260 printer/copier is turned off.
Push the green On/Off button on the front of the Spire CX260.
Note: The Spire CX260 can be turned on when the Xerox DocuColor 242/
252/260 printer/copier is turned off. In this state, the server runs until
turned off manually by the user. If the server is running and the printer is
then turned on, the server continues running and is not affected by this
action.
Note: If there are jobs that are being processed or printed, a message is
displayed.
Ta s k b a r w i t h S p i r e i c o n
Taskbar without Spire icon
To Next Page
Loading...
Need help?
General
