Setting Parameters in the Job Parameters Window 189
PS Overprint
¾ Select Ye s to use the overprint information in the Postscript file.
This parameter also determines whether the DTP application overprint settings are
honored in the RIP.
The Color Tab
The Color tab provides you with tone compression tools such as brightness,
contrast, and gradation, as well as color tools, including rendering intent, ink saving,
and RGB and CMYK workflows. In addition, you can select various screening
methods for your job.
The Spire CX260 accepts the following color formats:
• RGB
• CMYK
• L* a* b*
• Spot color
• Grayscale
• Duotone
Note: If you change any of the Destination, Rendering Intent, Emulation,
RGB Workflow, or Spot Color Editor settings in your RTP job, the Spire
CX260 re-RIPs your job. If you do not wish your job to be re-RIPed, apply the
options prior to initial RIPing.
The
Gradation, Brightness, Contrast, and Calibration settings do not require
re-RIP.
To Next Page
Loading...
Need help?
General
