100 Chapter 4 – Tools and Utilities
5. To save the selected tray alignment settings, click Finish.
Enabling Tray Alignment for a Job
1. Under the Paper Stock tab, select Tr a y.
2. Select the relevant tray
3. Select the Use Tray Alignment settings check box
4. Re-RIP the job in order for the settings to take effect.
Printing on Tabs Using the Spire Tabs Plug-In for Acrobat
Creating Tabs With the Tabs Plug-in
The Spire Tabs plug-in for Acrobat (version 7.0 or later) enables you to create and
place tabs in your unprocessed (PDF or PostScript) jobs, manage the tab and text
attributes, and save a set of attributes for future use.
When using the Spire Tabs plug-in to create tabs, it is not necessary to define
exceptions on the Exceptions tab.
To c r e a te t a b s :
1. In the Storage window, right-click your unprocessed job and select
Job Preview&Editor.
Note: This feature is only available for the Pro Basic and Pro Control Station
configurations.
Important: If you add tabs to your job, you need to select the Mixed paper
size document check box (in the Job Parameters window, on the Paper Stock
tab, under Mixed paper size).
Note: The job must be a PDF or PostScript file.
To Next Page
Loading...
Need help?
General
