Backing Up and Restoring the Spire CX260 213
Preloaded Software
The Spire CX260 is delivered to the customer site preloaded with the following
items:
• Microsoft Windows XP Professional operating system with SP2
• Internet Explorer® 6.0 browser
• Nero Express DVD-burning software
• Spire CX260 software
• Adobe Acrobat
7.0 software
• Configured network parameters (host name, IP address, network services and
protocols)
• Backup of Factory Default configuration for partitions C and D
Disk Configuration
The following table outlines the Spire CX260 disk configuration.
Table 15: Spire CX260 disk configuration:
Backing Up and Restoring the Spire CX260
When you back up the Spire CX260 system partition (partition C), all the operating
system files are copied to partition E (LI.GHO and LIxxx.GHO).
The backup and restore procedures do not require Windows XP Professional
activation, and are not related to the system reinstallation.
Disk 0 C: (10 GB)
Windows XP
Professional software
Spire CX260
software
D: (~50 GB)
Spool files
Shared files
Output directory files
Job list backup folder
E: (16 GB)
Backup
• Factory Default—
read-only file
(FD.GHO)
(FDxxx.GHS)
• Last Image
(LI.GHO)
(LIxxx.GHS)
Boot partition:
(31 MB)
Used during system
backup
Disk 1 Image disk
Disk 2 Image disk
Attention:
• To ensure a successful backup, there must be at least 1 GB of disk space
available in partition C.
• Before performing the backup procedure, make sure that your computer’s
configuration is the one that you want to use when restoring the system.