Working from a Macintosh Client Workstation 23
6. Browse to the Spire CX260 network printer (if you are defining an IP printer,
enter the Spire CX260 IP address or host name, and the exact name of the
printer to which you want to print—for example, CX260_ProcessPrint.
7. In the Printer Using list, select Other.
8. Browse to the folder to which you copied the CX260_V2.PPD file and select it.
9. Click Open to assign the CX260_V2.PPD file to the selected network printer.
10. Click Add to add the new printer to the printer list.
You have successfully installed a network printer for the Spire CX260 and are
ready to start printing.
Printing from a Macintosh Client Workstation
1. Open the file you would like to print in the corresponding application—for
example, open a Quark file.
2. From the File menu, select Print.
3. From the Printer list, select the desired printer.
4. In the Copies & Pages list, select Printer Features.
To Next Page
Loading...
Need help?
General
