Setting Parameters in the Job Parameters Window 183
Print Method
¾ Select one of the following options:
Simplex: for single-sided printing
Duplex Head to Toe: for calendar-style hard copies (usually used with
landscape jobs)
Duplex Head to Head: for book-style hard copies (usually used with portrait
jobs)
Print Mode
¾ In the Print Mode area, select the desired print mode:
Composite (default setting): prints the job without separations. Each page of
the job is printed once.
Separations: prints the job with color or grayscale separations. If you select
color separations, each page in the job is printed separately in four colors:
cyan, magenta, yellow, and black. If you select grayscale, each page in the job
is printed separately four times in different shades of grayscale (K).
Progressive: prints each page of the job four times in progressive color
separations:
Sheet 1 is printed only in C.
Sheet 2 is printed in C and M.
Sheet 3 is printed in C, M, and Y.
Sheet 4 is printed in C, M, Y, and K.
Note: This feature is only available for the Pro Basic and Pro Control Station
configurations.
To Next Page
Loading...
Need help?
General
