Setting Parameters in the Job Parameters Window 187
2. In the Image Quality list, select the attributes of the media. The options vary
according to the media that you selected in the Media Type list.
3. To create a glossy finish on the job pages, select Gloss Enhanced.
4. To print the second side of each page in a manual duplex workflow, select Side-
2 printing.
Tray Alignment
¾ Select the Use tray alignment settings check box to use the settings as defined
in the Tray Alignment Wizard.
The Print Quality Tab
Text /Line Quality
The Text/Line quality parameter improves text quality. Text/line quality and text
and line-art elements are processed separately to produce optimal rendering of all
the elements on a page. This option improves the text quality of diagonal lines,
borders, and blends; causes blends to appear smooth with no banding; and displays
crisp diagonal lines without (or with minimal) jaggies (rough edges) which are the
result of the limited resolution of the print engine.
1. Select High to improve the text quality.
2. In the Enhance area, select the elements you want to enhance:
• Overlapping elements improves the edge quality of overlapping vector and
image elements—for example, text on top of a transparent
image
Note: Side-2 printing is not supported for all media types.
Note: If you select Overlapping elements, the corresponding
enhancement is automatically selected in the
Image Quality
parameter.
To Next Page
Loading...
Need help?
General
