Working from a Macintosh Client Workstation 21
Deactivating the Print Driver Software
To deactivate the Print Driver software:
1. On the desktop, select Start > Settings > Printers and Faxes.
2. Right-click the printer icon, and select Properties.
3. Click the Print Driver tab.
4. In the Enable enhanced user interface list, select off.
5. Click Apply.
6. Click OK to close the dialog box.
Uninstalling the Print Driver Software
1. On the desktop, select Start > Settings > Printers and Faxes.
2. Right-click the Spire CX260 network printer, and select Delete.
The printer is deleted from your client workstation.
Working from a Macintosh Client Workstation
Defining a Printer on Macintosh Client Workstations
You can submit jobs using the Spire CX260 published printers over a TCP/IP
protocol. This connection enables a significantly higher spooling speed.
The Spire CX260 can receive print jobs from client workstations running Mac OS 9
and Mac OS X. As an example, the following section describes how to define a Spire
CX260 network printer for a client workstation with a Mac OS X operating system.
To Next Page
Loading...
Need help?
General
