Working from a PC Client Workstation 13
The Spire CX260 can receive print jobs from client workstations with one of the
following Windows operating systems:
• Windows 2000
• Windows XP
• Windows 2003
To print a file:
1. Open the file you would like to print in the corresponding application—for
example, open a PDF file in Adobe Acrobat.
2. From the File menu, select Print.
The Print dialog box appears.
3. From the Name list, select the desired Spire CX260 network printer—for
example, <servername>_ProcessPrint.
4. If desired, click Properties and modify the job parameters using the Spire Print
Driver software.
For more information about the Spire Print Driver software, see Spire Print Driver
Software on page 13.
5. Click OK.
6. Click OK in the Print dialog box.
The file is sent to the Spire CX260.
Spire Print Driver Software
About the Print Driver Software
The Spire CX260 Print Driver software enables you to set job parameters for jobs
that you send to the Xerox DocuColor 242/252/260 printer/copier from any
application on your PC client workstation.
Note: Printer's Default indicates that the value is taken from the settings
of the selected published printer on the Spire CX260.
To Next Page
Loading...
Need help?
General
