Xerox DocuColor 252 User Manual

Calibration 129
8. Set the number of copies you need by typing the number or using the arrows
next to the box to select the number.
9. Click Print.
The Start Point Density calibration chart is printed.
10. Collect the chart(s) from the printer.
Step 2 of the Color Calibration Wizard appears. In this step you scan the start
point chart so that the wizard can measure each separation and find the point at
which the toner appears on the paper.
Note: Since the performance of the Xerox DocuColor 242/252/260
printer/copier is best after several pages have been printed, it is
recommended that you print at least 10 copies of the first calibration chart
and use one of the last copies printed.
Note: If you selected
Automatic as the Screening Method in Step 1 of the
wizard, the Xerox DocuColor 242/252/260 printer/copier prints two
charts, an Image Density Calibration chart and a Text/Line Art chart.

Xerox DocuColor 252 Specifications

General

Category	All in One Printer
Print Technology	Laser
Print Speed (Color)	50 ppm
Print Resolution	2400 x 2400 dpi
Processor Speed	1.2 GHz
Hard Drive	40 GB
Max Paper Size	13 x 19 in
Connectivity	Ethernet, USB
Operating System Compatibility	Windows, Mac OS, Linux
Duplex Printing	Standard