Introduction to the Spire CX260 7
The three default virtual printers are:
• SpoolStore
Files are spooled directly to the Storage window and await operator processing.
You can only import PDL files (such as: PS, PDF, VIPP, VPS) to the spool store,
not RIPped - RTP files.
• ProcessPrint
Files are processed and printed directly to the Xerox DocuColor 242/252/260
printer/copier via the Spire CX260.
• ProcessStore
Files are automatically processed and stored in RTP format. After processing,
the files are stored in the Storage window of the Spire CX260 until the operator
re-submits them for printing.
With printing workflows tailored to your job requirements, the Spire CX260 enables
you to:
• Define new virtual printers
• Choose from which virtual printer to print
For information on defining and editing virtual printers, see Managing Virtual Printers
on page 93.
To Next Page
Loading...
