Working from a PC Client Workstation 15
In the Print Driver software window, you can perform the following actions:
• Define job parameters
• Change parameters
• Lock a job
• Save a set of parameters
• Load a saved set of parameters
• Check the status of the Xerox DocuColor 242/252/260 printer/copier
• Define PostScript parameters for the job
Setting Job Parameters in the Print Driver
1. Under Spire Settings, click the tab on which you want to change parameters:
• Print Settings
• Paper Stock
• Print Quality
• Color
• Services
• Finishing
For more information on setting the job parameters, see Setting Parameters in the
Job Parameters Window on page 182.
2. Click OK.
Locking a Job
The Print Driver software enables you to lock a job. When the locked job is sent to
one of the queues, a Locked indicator appears next to the job. If you want to
access the job parameters or send the job to print, you will be prompted to enter the
password for the job. For more information about unlocking a job in a queue, see
Unlocking a Job on page 59.
Notes:
• Some of the job parameters in the Print Driver software appear in a
different place from the Spire CX260.
• The Copies parameter value (located at the top of the Print Driver
software window) reflects the number of copies that you selected in the
Print dialog box of the software that you are currently working in.
Note: This feature is only available for the Pro Basic and Pro Control Station
configurations.
To Next Page
Loading...
Need help?
General
