Xerox Phaser 6120 Reference Guide

System Requirements for the Printer Driver98
System Requirements for the Printer Driver
Before installing the printer driver, make sure that your system meets the
following system requirements:
" This printer driver can also be used with Linux versions other than
those listed above if CUPS 1.1.15 or later is installed.
" As an example, the descriptions of the operations for SuSE are
provided in this chapter.
CPU Intel IA-32
Operating systems Red Hat Linux 9.0 (CUPS 1.1.15 or later),
SuSE Linux v9.x (CUPS 1.1.15 or later)
Applications OpenOffice 1.0.1 or later
Connecting the computer
and printer
USB connection, Parallel connection, Network
connection (10Base-T/10Base-TX/
1000Base-T)
RAM More than OS recommendation (128 MB or
more is recommended)
Network LPR (queue: lp, LP, default, DEFAULT)
AppSocket/HP JetDirect
Available hard disk space 256 MB or more

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm