Xerox Phaser 6120 - Printer Driver Settings; Basic Features

Specifying Printer Driver Settings
107
Printer Driver Settings
Basic Features
Parameters Settings
Auto Tray Switching Specifies tray switching behavior as Enabled
or Disabled.
 The default setting is Disabled.
Collate If Yes is selected, all pages in the documents
are printed as sets of printouts.
 The default setting is Yes.
Color Mode Specifies color mode as Color or Grayscale.
 The default setting is Color.
Duplex Options Specifies the duplex print binding position as
Long Edge, Simplex, or Short Edge.
 The default setting is Simplex.
Paper Source Specifies the paper source as Tray 1, Tray 2,
or Auto.
 The default setting is Tray 1.
Paper Type Specifies the paper type as Printer Default,
Plain Paper, Thick, Transparency,
Letterhead, Label, Postcard, Envelope, or
Glossy.
 The default setting is Plain Paper.
Resolution Specifies the resolution of the image as
2400dpi (Enhanced), 600dpi (Standard).
 The default setting is 2400dpi
(Enhanced).