Xerox Phaser 6120 - Installing PPD File from the Command Line

Installing PPD File From the Command Line
99
Installing PPD File From the Command Line
" Before proceeding with the installation, be sure to exit all running
applications.
" Root privileges are required in order to install ppd file.
1 Copy the ppd file from the CD-ROM to the directory “/usr/share/cups/
model/”.
2 Remove Administrator restrictions. Edit the /etc/cups/cupsd.conf by
commenting out of the following lines under Location/Admin: AuthType,
AuthClass, AuthGroupName (SuSe only).
3 Restart CUPS. At a command prompt, enter “/etc/init.d/cups restart”
" A ppd file for each language is available in the corresponding
“drivers/linux/ppd/<language>” folder on the Software and
Documentation CD-ROM. Use the appropriate ppd file for the
language.