Xerox Phaser 6120 Reference Guide

Specifying Print Settings
13
Basic
The Basic tab is used to specify the orientation, size, paper source, and
number of copies of a print job.
 Orientation
Select either a vertical or horizontal page orientation for printouts.
 Original Size
Specifies the paper size from the application.
 Output Size
Specifies the paper size for printer output.
 Paper Source
Select the print tray settings.
 Paper Type
Allows you to select the type of paper on which the print image will be
printed.
 Copies
This specifies the number of copies to be printed. If the Collate check box
is selected, all pages in the documents are printed as sets of printouts.
For example, if 5 is entered for Copies and Collate is selected, the
document is printed five times from the first page to the last page.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm