EasyManuals Logo
Home>Xerox>Printer>Phaser 6120

Xerox Phaser 6120 Reference Guide

Xerox Phaser 6120
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Understanding the CentreWare IS Window
119
Current Status
The current status of the printer is displayed at the top of all CentreWare IS
windows. The icon displays the type of status being displayed.
" By default, security is set to Disabled. If CentreWare IS is accessed
while security is Disabled, all users can view and change or submit
settings on the printer. When security is set to Enabled, users have to
login to submit any changes.
User Mode - Security Enabled
You automatically enter User Mode whenever you enter CentreWare IS. In
User Mode you can view configuration settings but not change them.
Administrator Mode - Security Enabled
In order to change any configuration settings through CentreWare IS, you
must first enter Administrator Mode:
1 Type the password in the Admin Password text box.
" The default password is “SYSADMIN”; however, once you have
logged on in Administrator Mode, the password can be specified in
the System/Administration/Security window.
2 Click the Login button.
If you type an incorrect password, the following message displays:
“Invalid Password Please check your input and try again !” Retype the
password.
Icon Status Description Examples
Ready The printer is online and
either ready to print or
printing.
READY
WARMING UP
PRINTING
Warning The printer needs attention,
but printing continues.
C TONER LOW
Error The printer needs attention
before printing can resume.
PUT A4 PLAIN TRAY 1
REPLACE C TONER
PAPER JAM TRAY 2
Caution The printer must be
rebooted. If that does not fix
the error, service is
required.
SERVICE CALL 04

Table of Contents

Other manuals for Xerox Phaser 6120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6120 and is the answer not in the manual?

Xerox Phaser 6120 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Time to first page (black, normal)13 s
Time to first page (color, normal)22 s
Print speed (black, normal quality, A4/US Letter)20 ppm
Print speed (color, normal quality, A4/US Letter)5 ppm
Internal memory128 MB
Processor model300 MHz, 32 bit RISC
Maximum print size210 x 297 mm
Maximum ISO A-series paper sizeA4
I/O portsUSB
Power requirements200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking featuresEthernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)10 - 85 %
Total input capacity200 sheets
Maximum input capacity500 sheets
Printer fontsPostScript
Maximum duty cycle35000 pages per month
Number of PostScript fonts139
Power consumption (printing)380 W
Storage temperature (T-T)-20 - 40 °C
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)442 x 395 x 341 mm

Related product manuals