EasyManuals Logo
Home>Xerox>Printer>Phaser 6120

Xerox Phaser 6120 Reference Guide

Xerox Phaser 6120
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
Troubleshooting112
Troubleshooting
Symptom Action
The printer stops because
of a paper size error or a
paper type error.
The job may have been sent with a prohibited
combination of settings (for example, for the
paper size and media type). Printing is not
possible with postcards or transparencies if
Plain Paper is selected.
Printing does not continue
with a custom paper size.
Printing with custom paper sizes is not
possible directly from the printer driver. This
can only be performed from the command
line. Specify the following command to print
data.
lpr -P [printer_name] -o media=Custom.
[WIDTHxLENGTH] [file_name]
1. Format of Custom. [WIDTHxLENGTH]:
Custom.150x200 mm, Custom.8x11 in,
Custom.15x20 cm, or Custom.612x782
(postscript points)
2. The specified file must be a PS, PDF or
JPEG file.
Printing cannot be
completed correctly from
OpenOffice or any other
Office application (such as,
Kword).
Applications running under Linux have their
own print settings. Some of these functions
may not be supported by this printer. Observe
the following for best printing results.
Settings made within the application:
Paper size and orientation
Settings made with the printer driver
(kprinter): Settings other than those
specified above (for example, paper type,
tray, and resolution)
When printing from Adobe
Reader, part of the image
is printed in solid black or
the job is interrupted.
There is a compatibility problem between
Ghostscript and Adobe Reader. Try using a
different PDF application.
Watermarks cannot be
printed from Kword.
This is a bug with Kword. Use Overlay
instead.

Table of Contents

Other manuals for Xerox Phaser 6120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6120 and is the answer not in the manual?

Xerox Phaser 6120 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Time to first page (black, normal)13 s
Time to first page (color, normal)22 s
Print speed (black, normal quality, A4/US Letter)20 ppm
Print speed (color, normal quality, A4/US Letter)5 ppm
Internal memory128 MB
Processor model300 MHz, 32 bit RISC
Maximum print size210 x 297 mm
Maximum ISO A-series paper sizeA4
I/O portsUSB
Power requirements200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking featuresEthernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)10 - 85 %
Total input capacity200 sheets
Maximum input capacity500 sheets
Printer fontsPostScript
Maximum duty cycle35000 pages per month
Number of PostScript fonts139
Power consumption (printing)380 W
Storage temperature (T-T)-20 - 40 °C
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)442 x 395 x 341 mm

Related product manuals