Xerox Phaser 6120 Reference Guide

Specifying Page Setup Settings72
Specifying a Custom Paper Size
You can also specify a paper size that is not listed in the Paper Size pop-up
menu.
1 Select Custom Page Sizes... from the pop-up menu, in the Page Setup
dialog box.
2 Click New.
The Edit Paper Sizes dialog box appears.
3 Enter a name for the custom paper size in the Custom Page Size Name
field, enter the dimensions in the Width and Height fields, enter the
margins in Margins fields, and then click OK.
" The default units used for the dimensions for Width, Height and
Margins is inches. To specify the unit of dimensions, select cm,
inches, or pts from the Units pop-up menu.
4 To add several different custom paper sizes, click New and repeat step 3.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm