Configuring the Printer148
USB Setup
The Print page enables more detailed printer settings to be specified.
Local Interface
USB (shown above)
The Print/Local Interface/USB Setup window provides the following
parameters for configuration:
Item Description
User Preferences
Enable USB If selected, enables the parameter settings for USB.
Default: [Checked]
Configuration Menu Equivalent:
MENU INTERFACE MENU/USB/
ENABLE
Job Timeout Sets the number of seconds the interface waits for
further data from the host before terminating a
spooled print job.
Range: 0 - 999 (in seconds)
Default: 60
Configuration Menu Equivalent:
MENU INTERFACE MENU/USB/JOB
TIMEOUT
Save Changes Saves and applies any changes made.
To Next Page
Loading...
