Xerox Phaser 6120 - Ipx;Spx; Ethertalk

193
IPX/SPX
Frame Type
EtherTalk
Name
Name 2
Netzone
Netzone 2
Purpose Set the protocol to use for NetWare IPX/SPX.
Range AUTO
802.2
802.3
ETHER II
SNAP
Default AUTO
Purpose Printer Name to find/locate printer on EtherTalk.
Range Up to 16 characters
Default Phaser 6120
Purpose Extension of EtherTalk Name to additional 16 characters,
making a total of 32 characters, if required.
Range Up to 16 characters
Default [Blank]
Purpose Set the Zone Name for EtherTalk.
Range Up to 16 characters
Default *
Purpose Extention of Netzone to additional 16 characters, making a
total of 32 characters, if required.
Range Up to 16 characters
Default [Blank]