Specifying Printer Driver Settings108
Details
Parameters Settings
Graphic Halftone Specifies the halftone for graphics as Detail
or Smooth.
The default setting is Detail.
Graphic RGB Intent Specifies RGB intent for graphics as
Photographic, Vivid, Relative Color, or
Absolute Color.
The default setting is Vivid.
Graphic RGB Source Specifies RGB source for graphics as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
The default setting is sRGB.
Image Halftone Specifies the halftone for images as Detail or
Smooth.
The default setting is Smooth.
Image RGB Intent Specifies RGB intent for images as
Photographic, Vivid, Relative Color, or
Absolute Color.
The default setting is Photographic.
Image RGB Source Specifies RGB source for images as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
The default setting is sRGB.
Simulation Gray Treatment Specifies simulation gray treatment as
Composite Black, Black and Gray, or
Black Only.
The default setting is Composite Black.
Simulation Match Paper
Color
Specifies Match Paper Color as On or
Off.
The default setting is Off.
Simulation Profile Specifies the simulation profile as None,
SWOP, EuroScale, Commercial Press,
DIC, or TOYO.
The default setting is None.
To Next Page
Loading...
