Configuring the Printer
129
Color Mode Sets the mode to use color or monochrome output.
Choices: Color, Grayscale
Default: Color
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT/COLOR
MODE
Toner Out Action Determines if the printer continues accepting jobs
sent to it when a low toner condition occurs.
Choices: Stop, Continue
Default: Stop
Configuration Menu Equivalent:
MENU QUALITY MENU/TONER OUT
ACTION
Density Control Adjusts toner (color) density of each color (cyan,
magenta, yellow, and black). The higher the value,
the higher the density of the color.
Range: 1 - 5
Default: 3
Configuration Menu Equivalent:
MENU QUALITY MENU/DENSITY
CONTROL
Save Changes Saves and applies any changes made.
Discard Changes If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Set as Default button Saves the changes made to Custom values.
Restore Default button Restores the Custom values to the ones saved in
custom defaults.
Restore Factory button Changes all settings to the Factory values.
Item Description