Description of Menu Items
Phaser® 6180MFP Multifunction Printer
9-17
■ Banner Sheet: Specifies the settings for the banner sheet.
■ Insert Position (default: Off): Selects the position to output the banner sheet from:
Off, Front, Back, and Front & Back. When Off is selected, the banner sheet is not
printed.
■ Specify Tray (default: Tray 1 (MPT)): Specifies the tray from which the banner sheet
is output: Tray 1 (MPT), Tray 2, or Tray 3.
Tray 3 is displayed only when the optional sheet feeder is installed.
■ Fax Activity: The printer can be set to print a report on faxes sent and received.
■ Auto Print: When set to Auto Print, the printer automatically prints a report every 50
fax jobs.
■ No Auto Print (default): No report is automatically printed.
■ Fax Transmit: Specifies when a fax transmission report is printed.
■ Print Always: Prints a transmission report for every single recipient fax job.
■ Print at Error (default): Prints a transmission report only when an error occurs.
■ Do Not print: No transmission reports are printed.
■ Fax Broadcast: Specifies when a fax transmission report is printed for group jobs.
■ Print Always (default): Prints a transmission report for every group fax job.
■ Print at Error: Prints a transmission report only when an error occurs during a group
job.
■ Do Not print: Transmission reports are not printed.
■ Protocol Monitor: Specifies the protocol monitor report to detect the cause of the
communication trouble.
■ Print Always: Prints a report for every fax job.
■ Print at Error: Prints the report only when a communication error occurs.
■ Do Not print (default): The report is not printed.
■ RAM Disk: Allocates memory to the RAM Disk file system for the secure print, collating
jobs, and Sample print features.
■ Enable: Allocates memory for using the secure print and proof print features.
■ Disable (default): Does not allocate memory for using the secure print and proof print
features.
This item is displayed when at least 256 MB of memory are added.
■ Tray Substitution: Specifies whether to print on paper loaded in another tray when there
is no paper left in the tray selected by the auto tray selection feature.
■ Off (default): Select this to display a message prompting you to load paper.
■ Larger Size: Select this to replace the paper with a larger size paper before printing in
100% magnification ratio.
■ Nearest Size: Select this to replace the paper with the nearest size paper before
printing in 100% magnification ratio.
■ Tray 1 (MPT) Feed: Select this to print on paper loaded in Tray 1 (MPT).
■ Startup Page: Specifies whether to print the Startup page when the printer is powered on.
To Next Page
Loading...
Need help?
General
