Xerox Phaser 6600 - Page 252

Error Troubleshooting
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
2-156
062 322 Parameter error Scanner Error 062-322
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Page 2-209
062 360 HPSensor Error Carriage home position
error
Scanner Home Position Sensor
Error 062-360
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Page 2-209
062 371 IIT failure Lamp error Scanner Lamp Error 062-371
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Page 2-209
062 393 CcdAsic Error CcdAsic communication
error
Scanner Error 062-393
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Page 2-209
062 790 Copy Limit Copy limit Copy Limit Error
Last sheet not copied.
* Caution screen with [Close]
button
Page 2-209
071 100 IOT Tray1
Misfeed JAM
Detect Tray1 Misfeed JAM no message Page 2-192
072 100 IOT Tray2
Misfeed JAM
Detect Tray2 Misfeed no message Page 2-193
072 101 IOT Path2 SNS
On JAM
Detect Path2 SNS On JAM no message Page 2-193
072 211 IOT Option
Feeder2 Failure
Detect Feeder2 Failure Tray 2 Error 072-211
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Code:xxxxxxxxh
Page 2-178
075 100 MSI Misfeed JAM Detect VSYNC On
JAM(TBD)
no message Page 2-195
075 910 MSI Detached MSI Detached Bypass Tray Missing 075-910
Insert Bypass Tray.
Page 2-196
077 101 VSYNC?ON?JAM Detect VSYNC On JAM no message Replace the
MCU Board.
WorkCentre 6605 Error Code List
Chain Link Error Error Details Control Panel Messages
FIP
location