Xerox WorkCentre 6605

Maintenance
WorkCentre 6605 Color Multifunction Printer 213
User Guide
To perform an automatic color registration adjustment:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Color Registration > Auto Registration > Start.
The printer runs while it performs the Auto Registration routine.
Performing a Manual Color Registration Adjustment
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a color registration adjustment:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Color Registration > Print Registration Chart > Print.
5. Starting with the left side calibration lines, circle the line in each group where the color bar aligns
with the adjacent black bars.