Installation and Setup
WorkCentre 6605 Color Multifunction Printer 79
User Guide
11. Close the System Preferences window.
Note: When you open a shared folder, a Shared Folder banner appears in the Finder for the
folder and its subfolders.
Adding a Folder as an Address Book Entry Using CentreWare Internet
Services
1. At your computer, open a Web browser, type the IP address of the printer in the address field,
then press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your
Printer on page 30.
2. Click Address Book.
3. Under Network Scan (Comp./Serv.), click Computer/Server Address Book.
4. Click Add next to any empty field, and enter the following information:
• Name: Enter the name that you want to appear in the Address Book.
• Server Type: Select Computer (SMB).
• Host Address: Enter the IP address of your computer.
• Port Number: Enter the default port number for SMB, 139, or select a number from the
range provided.
• Login Name: Enter your computer user name.
• Login Password: Enter your computer login password.
• Re-enter Password: Enter your login password again.
• Name of Shared Directory: Enter a name for the directory or folder. For example, if you
want the scanned files to go in a folder named scans type scans.
• Subdirectory Path: Enter the path of the folder on the FTP server. For example, if you want
the scanned files to go in a folder named colorscans inside the scans folder, type
/colorscans.
5. Click Save Changes.
Adding a Folder as an Address Book Entry Using the Address Book Editor
1. On your computer, select Start > All Programs > Xerox Office Printing > WorkCentre 6605.
2. In the left navigation pane, under Printer Address Book, click Server.
3. For Name, enter the name of the shared file on your computer.
4. For Server Type, select Computer (SMB).
5. Click Computer Settings Wizard, then click Browse.
6. Navigate to a shared folder on your computer.
7. Click OK, then click Next.
8. To give the printer access to the shared folder, enter a login name and password.
9. Click Next, then click Finish.