YASKAWA DX200 - Page 1041

Alarm List Alarm Number (4000 to 4999)
Alarm List-820
3 An attempt was made to start
the job that could not be
started by the macro
instruction.
Setting error (1)Check the following settings.
∙ Check the settings for macro job.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
5 An error occurred in the
operation process of job call
stack when the execution of
macro instruction was
cancelled.
Software operation error
occurred
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance
mode, and then contact your Yaskawa representative about
occurrence status (operating procedure).
6 Incorrect macro number Software operation error
occurred
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance
mode, and then contact your Yaskawa representative about
occurrence status (operating procedure).
4608 WRONG EXECUTION
OF GETARG INST
1 The job argument is not set. Setting error (1)Check the following settings.
∙ Check the settings for jobs.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
2 No number of the specified
job argument
Setting error (1)Check the following settings.
∙ Check the settings for jobs.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
3 The data types of job
argument disagreed.
Setting error (1)Check the following settings.
∙ Check the settings for jobs.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
4609 MEMOPLAY ERROR 2 The memory play file was
being used in another system.
Setting error (1)Check the following settings.
∙ Check the setting of the used memory play file number.
Alarm
Number
Alarm Name
Sub
Code
Meaning Cause Remedy