10 Job Data Simplified Restoration Function
10.3 If Fail in Simplified Restoration
10-12
10.3 If Fail in Simplified Restoration
Execute the following procedure if failing in the restoration by Job data
simplified restoration method.
10.3.1 Rechecking Job Data
1. Select {RE CHECK} under {UTILITY}
– Press {RE CHECK}
2. Restoration is completed.
– * Proceed to the next operationchapter 10.3.2 “If Data
Inconsistency Alarm Occurs Again” at page 10-13 if the alarm
occurs again after this operation.
To Next Page
Loading...
