12 Program Upload Function
12.5 In Case of the Compact Flash Failure
12-10
12.5 In Case of the Compact Flash Failure
Prepare as follows for the compact flash failure.
12.5.1 Preparation of Compact flash for YCP21
Prepare the compact flash for YCP21.
Prepare the one inserted to the YCP21, which was shipped as a spare-
part, or the one shipped exclusively for YCP21 (it needs a special
treatment for start-up, and thus our standard recommended compact
flashes are unavailable).
12.5.2 Program Upload
Save the system program of the DX200 into the compact flash following
the procedures mentioned in chapter 12.2 “Program Upload Procedure”
at page 12-2. Be sure to retain the compact flash for system restoration.
12.5.3 Backup the Batch Data
Backup the batch data by following the procedures mentioned in "9.2
Backup by CMOS.BIN" or "9.3 Automatic Backup Function" in "DX200
INSTRUCTIONS". Be sure to retain backed-UP data.
Please be prepared for the compact flash failure for the quick and easy
restoration of the DX200.
To Next Page
Loading...
