13 Trouble Shooting When Alarm is not Displayed
13-1
13 Trouble Shooting When Alarm is not Displayed
When DX200 doesn’t start and any alarm is not displayed, turn ON and
OFF the power of DX200 controller.
When the condition doesn’t change even after turning ON and OFF the
DX200, follow the steps below.
• To check the LED display of each unit, open the door of DX200
while the power is ON. When check the LED indication, be sure not
to touch devices in the DX200.
Touching the devices may result in an electric shock.
To Next Page
Loading...
