YASKAWA DX200 - Page 50

5 Replacing Parts
5.1 Replacing DX200 Parts
5-10
<Pattern 2>
[JANCD-YIF01-2E circuit board is used]
It can be replaced with “JANCD-YIF01-4E” or “JANCD-YIF01-2E”.
*If replace it with “JANCD-YIF01-2E”, it is used as its memory size is
2MB.
<Pattern 3>
[JANCD-YIF01-2E circuit board is used]
It can be replaced with “JANCD-YIF01-2E”.
If replace it with “JANCD-YIF01-4E” and the CMOS.BIN data is
loaded, the following error occurs.
ERROR 3230 : System not matched