5 Replacing Parts
5.1 Replacing DX200 Parts
5-9
Check Procedure of Used Memory Size and Mounted Memory Size
1. Start up the system in maintenance mode, and select {SYSTEM}
{SETUP} {CMOS MEMORY}.
2. Check “USED SIZE” and “MOUNTED SIZE” in the CMOS MEMORY
window.
<Pattern 1>
[JANCD-YIF01-4E circuit board is used]
It can be replaced with “JANCD-YIF01-4E” or “JANCD-YIF01-2E”.
*If replace it with “JANCD-YIF01-2E”, it is used as its memory size is
2MB.
To Next Page
Loading...
