5 Replacing Parts
5.1 Replacing DX200 Parts
5-24
5.1.5.2 Universal I/O Circuit Board
The types of fuses on the universal I/O circuit board (JANCD-YIO21-E)
are as follows.
Fig. 5-17: Universal I/O Circuit Board (JANCD-YIO21-E)
If the fuse is blown, replace it with the same type of fuse (supplied or
spare parts).
Parts No. Fuse Name Specification
F1, F2 24VDC fuse for I/O 02173.15P, 250V,3.15A,
Rapid cut fuse
(LITTEL)
If the fuse seems to be blown, be sure to investigate its
cause, or blown again after the replacement.
F1,F2
Power supply
protective fuse
3.15A/250V
To Next Page
Loading...
