Alarm List
Alarm Number (4000 to 4999)
Alarm List-471
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
3 The source job cannot be
edited.
Setting error (1)Reset the alarm.
(2)Check the following setting.
∙ The prohibit status of source job
If the source job is protected from editing, it cannot be edited.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
4 The converted job cannot be
edited.
Setting error (1)Reset the alarm.
(2)Check the following settings.
∙ The prohibit status of converted job
If the converted job is protected from editing, it cannot be edited.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
5 The memory area for job area
is insufficient.
Software operation error
occurred
(1)Reset the alarm.
(2)If the error occurs again, delete unused jobs.
(3)If the error occurs again after the previous measures were
executed, initialize the job file in the maintenance mode, and then load
the saved job file. In that case, delete the unused jobs.
(4)If the error occurs again though the previous measures were
executed, save the CMOS.BIN in maintenance mode, and then contact
your Yaskawa representative about occurrence status (operating
procedure).
6 The source job is not exist. Setting error (1)Check the following settings.
∙ Presence of the specified source job
The job which does not exist cannot be set to the source job.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
Alarm
Number
Alarm Name
Sub
Code
Meaning Cause Remedy
To Next Page
Loading...
