YASKAWA iQpump1000 - Page 87

n
Flange Type Panel Cutout Dimensions for External Heatsink Mounting
CUTOUT
NOTES:
1. CUTOUT TOLERANCES:
+/- 0.02 in. [0.5 mm]
2. EXPOSED HEATSINK DEPTH
3. MINIMUM RECOMMENDED PANEL
THICKNESS: 10 GA
D=7.71 in. [196 mm] MINUS PANEL THICKNESS
(20)-3/8 in. [M10]
THREADED HOLES
Unit: in. [mm]
Figure 2.42 Models 4A0515 and 4A0675
2.2 Flange Type Enclosure (NEMA 12 Backside) Dimensions & Heat Loss
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual
87
2
Mechanical Installation