YASKAWA JUSP-MD D01A Series - SERVOPACK Model Designation; Converter Model Designation

1.6 Model Designations
1-15
1
Outline
1.6.2 SERVOPACK Model Designation
This section shows SERVOPACK model designation.
Note: When digits 8 to 13 are all zeros (0) in the model designation, the zeros are not shown.
1.6.3 Converter Model Designation
This section shows converter model designation.
Note: When digits 8 to 13 are all zeros (0) in the model designation, the zeros are not shown.
SGDV
Series
SGDV Σ-V Series
1st + 2nd + 3rd digits: Current
Voltage Code
Max. Allowable
Motor Capacity
400 V 101 37.5 kW
4th digit: Main Circuit Power Supply
Voltage
Code Voltage
J
DC power input from sepa-
rate 400-VAC converter
5th + 6th digits: Interface Specifications
Code Interface
F1
Multi-winding drive type, rotational servo-
motor
11th + 12th digits: Software
Specification
Code Specification
00 Standard
–
7th digit: Design
Revision Order
1st + 2nd +
3rd digits
4th
digit
5th + 6th
digits
7th
digit
101 J
F1
A
8th + 9th +
10th digits
000
8th + 9th + 10th digits: Hardware Specifications
Code Specifications
000 Base-mounted (standard)
001 Duct-ventilated
002 Va r ni sh e d
003 Duct-ventilated and Varnished
11th + 12th
digits
00
13th
digit
0
13th digit: Parameter Specification
Code Specification
0 Standard
Rotation
SGDV
Series
SGDV Σ-V Series
1st + 2nd + 3rd digits: Product
group
Code Specifications
COA
Resistive regenerative
converter
4th + 5th + 6th digits: Power
Supply Capacity and Voltage
Specifications
Code
Power Supply
Capacity
Voltage
5ED 55 kW 400 V
–
7th digit: Design
Revision Order
1st + 2nd +
3rd digits
4th + 5th +
6th digits
7th
digit
COA
5ED
A
8th + 9th + 10th + 11th +
12th + 13th digits
000000
8th + 9th + 10th + 11th + 12th +13th digits:
Hardware Specifications
Code Specifications
000000 Base-mounted (standard)
001000 Dust-ventilated
002000 Va rn ishe d
003000 Dust-ventilated and Varnished