YASKAWA JUSP-MD D01A Series - Parameters

10 Appendix
10.2.2 Parameters
10-14
Pn008
2
Application Function Select
Switch 8
0000 to 7121
− 0000 After restart Setup −
Pn009
2
Application Function Select
Switch 9
0000 to 0111
− 0010 After restart Tuning −
(cont’d)
Parameter
No.
Size Name
Setting
Range
Units
Factory
Setting
When Enabled
Classifi-
cation
Reference
Section
Lowered Battery Voltage Alarm/Warning Selection
Reference
Section
0 Outputs alarm (A.830) for lowered battery voltage.
5.9.3
1 Outputs warning (A.930) for lowered battery voltage.
Reserved (Do not change.)
Warning Detection Selection
Reference
Section
0 Detects warning.
9.2.1
1 Does not detect warning (except for A.971, A.9b0, and A.9b1).
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.

Automatic Offset Adjustment of Motor Current Detection Signals
Reference
Section
0 Does not execute automatic adjustment.
−
1 Executes automatic adjustment when the main circuit power supply is turned ON.
Current Control Method Selection
Reference
Section
0 Current control method 1
6.6.3
1 Current control method 2
Speed Detection Method Selection
Reference
Section
0 Speed detection 1
6.6.5
1 Speed detection 2
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.
