3 Wiring and Connection
3.1.2 Main Circuit Wire
3-8
(3) Wire Size (UL Standard)
To comply with the UL standard, use the recommended wires.
The following table shows the wire sizes (AWG) at a rating of 75°C.
Wire Sizes for SERVOPACKs and Converters
∗ Use SERVOPACKs and converters in the specified combinations.
Crimp Terminals, Sleeves, Terminal Kits for SERVOPACKs and Converters
∗1. Use SERVOPACKs and converters in the specified combinations.
∗2. Use sleeves for the crimped section of the terminals.
∗3. A terminal kit includes the crimp terminals and sleeves required for one SERVOPACK or converter.
Combination of SERVOPACK and
Converter
*
Terminal Symbols
Screw Size for
Termina l s
Tightening
Torqu e
(Nm)
Wire Size AWG
SGDV-101J
SGDV-
COA5EDA
SERVOPACK
P, N M8 15.0
Bus bar attached
to the converter
U, V, W M8 3.0 1
DU, DV, DW M6 3.0 10
M8 9.0 to 11.0 1
Converter
P, N M10 12 to 20
Bus bar attached
to the converter
L1, L2, L3 M10 12 to 20 2
1, 2
M10 12 to 20 2
CN101
(24 V, 0 V)
–
(Connector)
–14
B1, B2 M10 12 to 20 8
M8 9.0 to 11.0 2
Combination of SERVO-
PACK and Converter
Terminal
Symbols
Crimp Terminal
Model (Made by
J.S.T. Mfg Co.,
Ltd.)
*1
Sleeve Model
(Made by Tokyo
Dip Co., Ltd.)
*2
Terminal Kit Model
*3
SGDV-101J
SGDV-
COA5EDA
SERVOPACK
U, V, W R60-8 TP-060 (black)
JZSP-CVT9-101J-E
DU, DV, DW R5.5-6 TP-006 (black)
R60-8 –
Converter
L1, L2, L3 R38-10 TP-038 (black)
JZSP-CVT9-5ED1-E
1, 2
R38-10 TP-038 (white)
B1, B2 R8-10 TP-014 (white)
R38-8 –
To Next Page
Loading...
